A half piece I’m staggering this this pattern roam tomatoes look a little more more classic but it’s a full piece it’s a full piece actually in this edge and it’s a full piece at the entrance of the other shower this is to give this nice feeling of of a precision you know custom-made thin instead of just kind of throwing these around what.
I do here is that actually per-cut everything measure everything I start working from here down to make sure that everything just was fine and I actually lay the entire thing down without any type of things it so you know just to make sure everything was fine then after I knew that everything was kind of good you can actually step on it it’s.
porcelain you can step on it even without it the cement so you step on it and you can do measurements together once you responsible you start working in both your way out so you can actually paint with a nice edge at the end and you finish it you know maybe you don’t even have the chance to have all this little clean but you strive to make sure everything will look natural if you’re going to try to that that’s really crucial for you to you know ensure.
something good work and here’s a you know very expensive toilet very efficient though it doesn’t consume that much water so it’s really good here’s a little you know a little also a medicine cabinet reconvening right there’s a number I know body and just give you some some more storage um and being overly you know this is a a Korean finished up a counter top this is not not nothing out of the ordinary or we you know disable your cabinets or we kept those cabinets but this pretty much it I mean it’s not much older than this glass enclosure I mean this is probably the most expensive.
Drain fix perfectly doesn’t move this so I have completed three walls of my bathtub framing and this is the final result I didn’t build the front side because I need to get an access to my back of the bathtub to finish our niche and to finish the drain so I’m done with my frame I just want to add one more thing that might be helpful to you I’ve added additional.
on the left side of the Best Bathroom Remodeling NJ bathtub divide the bathtub and goes around it and the flat part of the top of the laptop is going to be supported by this piece because there is a angle going inside of the bathtub I had to shave the top to the shape of the curve and this will give me additional support on the top of the bathtub and I’m doing this because I’m gonna mount a frame less door right on the edge of the tub so this thing will be supported right here so not only the top is going to be supported by the edge.
At the top but too way for is going to fill this space over here and we’ll give the additional support which also will prevent the tub from moving in and out because when I was originally trying to level it and I noticed that even though the tub was setting on the edge of the frame it was still moving a little bit in and out in and out so by putting that this basically prevents.
The top for mowing because one of the edges the x is basically touching that the side of the tub and the other one is touching this side so it’s basically extra support for the top and it’s going to prevent it from moving now I’m starting to build a niche which is going to be you ride here so I had to cut the metal start at the top level I’m going to bend it I’m going to make it a sport for the bottom shelf okay so here is my niche already in place I just have to screw it put everything back together now very important thing when you want to put the wooden one into the metal style you have to remember that you have to open that lip to the outside the metal starts.
Rethought it would bathroom remodel pictures be even nicer to have tile back here so with that accommodate shampoo and so open whatnot I put a box here and here and here and here so this will be the main box for shampoo and stuff a little bit smaller box maybe some smaller bottles borrow soap or something small here and then sort of a woman shaving area here put your foot there maybe the razor or whatever.
so that’s that mostly just two by fours nails and backing one inch board backing back there and then some constructiveness solidify it now one thing I’m going to do this one’s actually has a little bit of a down slope about a sixteenth fan inch this one is the opposite these are pretty flat so once we get the drywall in I’m going to use some joint compound or something and make this just little bit of a slope coming down about a sixteenth of an inch almost unnoticeable in fact it will be unnoticeable.
Except to the water it will allow the water to roll off same as herein here just a little bit of joint compound mainly in the back area to have that at a slope it seems like that’d be logical so water wouldn’t pull up the other thing update here I put a some studs back here some two by fours not exactly sure where the mirror is going to be on it’s a large inch mirror it’s going to go roughly here to here so wherever it’s going to be hung there’s going to be some studs back there somewhere in this area was.
where the hooks are going to be so that’s that-talking to my wife last night we just added to add another electrical limelight right here so this will be a nice light above the mirror so I basically just added this right and off of the main light there also added another wire so I can have another electrical box over here there’s going to be some kind of cabinets or shelves shelf here it’ll have to be fairly small because the shower line is here we only have a few inches to work with but some sort of small shelf system there it’ll probably be custom-built but then we started thinking you know what if you.